Road maintenance crews in Poland face recurring marking work after winter. Frost, snow, moisture, and freeze-thaw cycles wear down road lines and reduce visibility. Spring and summer projects often cover lane dividers, parking bays, road edges, and directional arrows. For contractors handling these jobs, a Thermoplastic Road Marking Machine for Sale needs to match marking widths, site layouts, and daily workloads. Hot-melt markings offer wear resistance on roads, parking areas, and industrial sites. Walk-behind machines also suit projects that require frequent turns or work in confined spaces.
Thermoplastic Road Marking Machine Specifications
| Model | YG-CK360S |
| Thermoplastic Tank | Synchronous clutch spreading, equipped with a speed-adjustable gear shifting device; single/double spreading selectable as needed; 50–200 mm |
| Glass Bead Container | 10 kg/box |
| Glass Bead Spreader | Adjustable |
| Rear Wheel Directional Device | Ensures the machine moves in a straight line or turns freely on curved roads |
| Brake | Drum brake, brake tension adjustable |
| Marking Width | Standard 150 mm marking bucket; 100/150/200/250/300/400/450 mm (customer option) |
| Battery Capacity | 15 Ah |
| Battery Voltage | 48 V lithium battery |
| Driving Speed | 1–8 km/h |
| Working Duration | Up to 24 hours of road marking after a full charge |
| Dimensions | 1210 × 970 × 1070 mm |
| Net Weight | 130 kg |
Road Marking Work in Łódź, Poland
In spring 2026, a road maintenance contractor in Łódź planned marking work across urban streets, commercial parking lots, and warehouse access roads. Winter wear had left some lines faded, while new parking layouts required additional markings.
The contractor needed equipment for different line widths and curved sections across multiple sites. Existing equipment made it difficult to switch between marking tasks without interrupting the work schedule. The team also wanted battery-powered machines to avoid dependence on power cables during site operations.
After reviewing available road marking equipment in Poland, the contractor considered the YG-CK360S for parking layouts, road-edge lines, and other thermoplastic marking tasks.
YG-CK360S Solutions for Different Marking Tasks
Marking Widths for Roads and Parking Areas
The standard marking bucket measures 150 mm. Optional sizes include 100, 200, 250, 300, 400, and 450 mm for parking bays, lane dividers, and road-edge lines.
A 50–200 mm spreading system width describes the thermoplastic material spreading range. Marking bucket widths of 100–450 mm refer to available bucket sizes. These specifications cover separate components, and their ranges do not fully overlap. Check compatibility between the selected bucket and spreading system with YG Machinery before ordering.
A synchronous clutch supports single-line or double-line spreading. Adjustable-speed gear shifting lets crews control material flow for different marking tasks.
Steering Control Around Bends
Curved road sections, parking corners, and warehouse access lanes require consistent machine control. A rear-wheel directional device supports straight travel and turning, giving crews more control when following curved layouts. The adjustable glass bead spreader applies beads to fresh markings to improve nighttime visibility through retroreflection.
Battery Drive for Multiple Work Teams
The 48V lithium battery supports cable-free operation, while the machine’s adjustable travel speed ranges from 1 to 8 km/h. Its compact dimensions of 1210 × 970 × 1070 mm and 130 kg net weight allow crews to move it between work areas.
YG lists a working duration of up to 24 hours after a full charge. Actual operating time varies with working conditions and usage. Contractors who require heated thermoplastic application should verify the heating system and included accessories before ordering.
Customer Feedback After Field Use
After delivery, the contractor assigned the machines to teams working on parking lots, warehouse roads, and urban streets. The team reported that the available bucket options made it easier to handle different marking layouts, while the directional device supported turns around parking bays and curved road sections.
The contractor shared this feedback:
“Our teams work across parking areas and urban roads, where line widths and layouts change from site to site. The bucket options give us more flexibility, and the directional device makes curved sections easier to handle. Having separate machines also gives us more room to schedule crews across different locations.”
The contractor plans to review equipment needs as further road maintenance and parking projects enter the schedule.
YG Thermoplastic Road Marking Equipment
YG Machinery manufactures and exports road construction equipment for overseas projects. Its road marking range includes thermoplastic machines and cold paint marking machines for different coating materials and application methods.
- Factory production and inspection: Equipment goes through assembly and pre-shipment checks before dispatch.
- Multiple marking configurations: Available bucket widths support different road and parking layouts.
- Thermoplastic and cold paint options: Contractors can select equipment based on marking material and application method.
- Export order coordination: YG assists with shipping documents, technical information, and operating guidance.
- After-sales support: The team provides technical assistance for equipment use and maintenance.
For contractors seeking a hot melt marking machine supplier or a parking lot line marking machine, YG Machinery offers equipment options for road maintenance, parking facilities, and industrial sites. Contact YG to discuss thermoplastic or cold paint marking equipment for projects in Poland.
