Polish manufacturing plants need efficient ways to remove grease, oil, and production residue from machinery and metal components. Manual cleaning takes time and often requires repeated wiping around narrow gaps. A dry Ice cleaning machine for sale uses compressed air to propel dry ice particles onto contaminated surfaces. Dry ice turns directly into gas during cleaning, leaving no liquid residue from the cleaning media.
In August 2026, Marek Zieliński, a maintenance manager at a manufacturing company in Łódź, Poland, contacted YG Machinery about a dry ice blasting machine for factory maintenance. His team wanted to clean greasy metal components and machine parts without introducing water during the cleaning process. Before placing an order, Marek focused on ice feed adjustment, compressed air demand, machine size, and daily operating costs.
Technical Parameters of Dry Ice Cleaning Machine for Sale
| Item | Parameter |
| Motor power | 370W |
| Voltage | AC220V, 50-60HZ |
| Air consumption | 28-106 CFM (0.8-3.0m³/min) adjustable |
| Air supply pressure | 0.1-0.9Mpa |
| Ice delivery speed | 0-0.75kg/min(adjustable) |
| Hopper capacity | 11kg (23.5 lbs) |
| Hopper size | 0.3m³ |
| Degree of protection | IP54 |
| Machine weight | 55kg |
| Dry ice state | 2.5-3mm |
| Drive mode | Direct connection |
| Machine size | 510×460×910mm |
Customer Challenges Before Choosing YG Machinery
Marek’s maintenance team cleaned metal parts that accumulated grease during production. Manual wiping required repeated effort, particularly around grooves and recessed sections. Workers also needed to avoid water residue near equipment and components that required dry cleaning.
The purchasing team focused on three practical issues:
Grease removal: Workers needed a process for removing grease and production residue from metal surfaces.
Workspace limitations: Compact dimensions mattered because operators moved equipment between maintenance areas.
Air compressor capacity: The factory needed an air supply capable of maintaining the machine’s specified airflow and pressure during operation.
Material compatibility also mattered. Rapid cooling during dry ice blasting for metal parts may affect certain plastics, coatings, seals, and brittle materials. Testing a small section before treating an entire component gives operators a chance to inspect surface condition and cleaning results.
YG Machinery’s Customized Solution
YG Machinery reviewed the factory’s cleaning tasks, available workspace, and compressed air requirements. Its industrial dry ice cleaning equipment offered adjustable ice delivery and a compact frame for maintenance work.
Adjustable Feed Rate for Grease Removal
Ice delivery ranges from 0 to 0.75 kg/min, allowing operators to adjust consumption during cleaning trials. Workers can start with a low feed rate, inspect remaining grease, and increase delivery when a component needs more cleaning.
For parts with narrow grooves, operators can inspect recessed areas after each trial. Recording cleaning time and dry ice consumption also gives Marek’s team useful figures for comparing dry ice blasting equipment with manual cleaning.
Compact Machine for Factory Maintenance
With dimensions of 510 × 460 × 910 mm and a weight of 55 kg, the machine occupies limited floor space. Factory staff can check doorway clearance, storage locations, and movement routes before installation.
Compressed air demand ranges from 0.8 to 3.0 m³/min, with a working pressure of 0.1–0.9 MPa. A compressor must maintain these values while blasting; a pressure drop or insufficient airflow can interrupt cleaning.
The factory also needs to verify electrical compatibility with its local supply before connecting the machine. These checks address the main purchasing concerns without adding unnecessary equipment requirements.
Customer Feedback and Results in Poland
During initial cleaning trials, Marek’s team focused on greasy metal components and production residue. Operators inspected cleaned surfaces, paying particular attention to grooves and recessed areas where dirt often remained after manual wiping.
The team also recorded cleaning time and dry ice consumption for each task. This information allowed workers to compare cleaning methods and identify which components benefited most from dry ice blasting.
For factory maintenance, a dry ice cleaning system offers a process that does not introduce water through its cleaning media. However, dry ice blasting does not eliminate every cleaning or workplace concern. Grease and removed contaminants still need collection, while operators must manage CO₂ exposure, noise, and cold contact.
Key precautions include:
Ventilation: Dry ice releases carbon dioxide gas. Maintain adequate ventilation and assess whether CO₂ monitoring is necessary.
Hearing protection: Compressed air and blasting can generate high noise levels. Assess workplace exposure and provide protection when required.
Protective equipment: Wear insulated gloves, eye protection, and suitable protective clothing when handling dry ice.
Surface testing: Check sensitive materials and coatings before cleaning an entire component.
Dry ice storage: Use insulated containers that allow gas to escape. Never store dry ice in airtight containers.
Why Choose YG Machinery Over Other Suppliers?
- Industrial product focus: Discuss ice delivery, air consumption, operating pressure, and cleaning tasks with a supplier familiar with dry ice cleaning equipment.
- International exports: YG Machinery serves overseas markets and can discuss shipping arrangements for orders to Poland.
- Factory-direct pricing: Request a quotation directly from the manufacturer and clarify which accessories and components the order includes.
- OEM and ODM services: Discuss customization requests and product specifications before production.
- Technical and after-sales assistance: Get guidance on machine setup, operation, routine maintenance, and troubleshooting.
For Polish buyers, key purchasing checks include electrical compatibility, compressor output, dry ice supply, and operator protection. Confirming these details before shipment makes installation planning more straightforward.
YG Machinery specializes in the production of dry ice cleaning machines over 20 years. Our popular products also include bottle blowing machines, wood splitters, fog cannon machines, etc. Contact us now for more details! Our staff are available 24/7 and will promptly reply to your inquiries!
