A high frequency wall saw is a powerful tool for cutting reinforced concrete, brick, and stone. It sits between hydraulic wall saws and small electric wall saws. It gives you more power than electric saws and is much lighter than hydraulic systems. This concrete wall saw is perfect for indoor jobs, tight spaces, and projects where noise and emissions matter. This wall mounted concrete saw runs on a guide rail for straight, precise cuts.
YG Machinery sells high frequency wall saws for building renovation, bridge repair, tunnel work, and demolition projects.
Technical Parameter of High Frequency Wall Saw
| Specification | Value |
| Max. cutting depth | 510mm |
| Max. saw blade | φ1200mm |
| Max. output power | 16kw |
| IP classification | IP 67 |
| Wall saw weight (incl. feed motor) | 27kg |
| Electric main motor weight | 18kg |
| Control unit weight | 19kg |
| Wireless control weight | 2kg |
| Voltage | 380-460V (single phase available) |
| Frequency | 50Hz/60Hz |
For deeper cuts over 510mm, a hydraulic wall saw offers more power.
Standard Configuration (Ready to Use)
Each high frequency wall saw comes with everything you need:
- High frequency electric motor (16kw, water-cooled, IP67)
- Control unit with cables
- Wireless remote controller (30m range)
- Guide rails
- Diamond saw blade (φ1200mm)
- Water cooling system
- Tool kit
Mount the rail, connect the cables, and start cutting. No need to buy extra parts.
Blade Size Selection Guide of Concrete Wall Cutting Machine
Choose the right blade size for your cutting depth:
| Blade diameter | Max cutting depth | Best for |
| 800mm | 320mm | Thin walls, small openings |
| 1200mm | 510mm | Standard walls, door openings |
| 1600mm | 730mm | Thick walls, heavy concrete |
Tips for cutting reinforced concrete:
- Check rebar layout before cutting
- Reduce feed speed when cutting through steel bars
- Keep water cooling on to protect blade life
High Frequency Wall Saw vs Traditional Wall Saw
| Comparison | High Frequency Wall Saw | Hydraulic Wall Saw |
| Cutting speed | 20-30% faster | Slower |
| Noise level | ~85 dB | ~100 dB |
| Weight (saw head) | 27kg | 50kg+ |
| Maintenance | Low (no oil leaks) | Higher |
| Emissions | None | None (electric) |
| Best for | Indoor, tight spaces, precision | Deep cuts, heavy demolition |
This wall saw machine gives you faster cutting, less noise, and easier handling.
For indoor use with no emissions, consider an electric wall saw.
Wireless Remote Control
The wireless remote controller works from up to 30 meters away. You can operate the saw from a safe distance. No need to stand near the blade or breathe dust. The remote shows cutting speed and depth. One worker can control the whole job.
This wall cutting saw keeps your team safer.
Lightweight Design
The saw head weighs only 27kg. The motor is 18kg. One worker can carry and install it. You do not need a crane or a big team. This makes the saw easy to use on high floors, in basements, and in tight spaces.
Most wall saw machines are heavy. This one is not.
Applications of Wall Saw Machine
This concrete wall cutting machine works in many jobs:
- Door and window openings in concrete walls
- Ventilation holes in tunnels and basements
- Bridge and tunnel repair
- Controlled demolition in limited spaces
- Elevator shaft enlargement
- Cutting reinforced concrete beams and columns
No emissions. Low noise. Clean cuts.
Customer Case 1 – Tunnel Project in Philippines
A tunnel project in the Philippines needed to cut ventilation shafts through 60cm thick concrete walls. The job site was underground with limited space and tight noise rules.
The team used a YG wall saw machine. They finished cutting 30 meters of concrete walls in four days.
Results:
- Cutting speed improved by 25%
- Noise stayed under 85 dB
- Workers were safer with remote control
The project manager said: “The YG high frequency wall saw made our tunnel work faster and safer. We will use it again.”
Customer Case 2 – Export to Australia
A building renovator in Australia needed a new wall saw for their projects. They found YG Machinery online. Our sales manager recommended a standard high frequency wall saw based on their needs.
The customer bought the machine. They use it for cutting door openings and ventilation holes in concrete buildings.
YG concrete wall saw have also been sold to other countries including Saudi Arabia, Canada, France, Chile, and the US.
Maintenance Tips
- Check blade before each use. Replace if worn.
- Clean rail after cutting. Dust makes the saw stick.
- Check water flow. No water means more dust and heat.
- Inspect cables for damage.
- Store control unit in a dry place.
Good maintenance makes your wall saw cutting machine last longer.
FAQ
Q: How deep can this high frequency wall saw cut?
A: Max cutting depth is 510mm with a 1200mm blade. For deeper cuts, consider a hydraulic wall saw.
Q: Can it cut reinforced concrete?
A: Yes. The diamond blade cuts through concrete and steel rebar. Reduce feed speed when cutting through rebar.
Q: What voltage does it need?
A: It works on 380-460V. Single phase and three phase are both available. Tell us your site voltage when ordering.
Q: How long does installation take?
A: Usually 10-20 minutes with one or two workers. The split design makes it fast to set up.
Q: Is it better than a hydraulic wall saw?
A: For indoor jobs and tight spaces, yes. It is lighter, quieter, and has no emissions. For very deep cuts over 510mm, hydraulic is stronger.
Q: Do I need water cooling?
A: Yes. Water cooling protects the blade, reduces dust, and extends blade life. Never run the saw without water.
Q: How do I replace the blade?
A: Stop power, remove the cover, take off the old blade, and tighten the new one. Follow the direction arrow on the blade.
Q: What maintenance does it need?
A: Clean cables, check bearings, inspect cooling lines, and check blade wear before each job.
Q: How far does the remote control work?
A: The wireless remote works up to 30 meters. You can operate from a safe distance.
Q: Can one person operate this machine?
A: Yes. One worker can carry, install, and operate the saw. The lightweight design makes this possible.
Why Choose YG Concrete Wall Saw
YG has been making Concrete Wall Cutting Machine for over 18 years. We test each machine before shipping. The motor is checked for power. The rail is checked for smooth movement. The blade is tested on concrete.
What you get from YG:
- Factory direct price (no middleman)
- 16kw high frequency motor with IP67 protection
- Lightweight 27kg design
- Wireless remote control
- Spare blades and parts in stock
- 24-hour online after-sales support
YG wall saw machine have been sold to many countries worldwide. We can ship to your project site.
