A Hydraulic Wall Saw Machine is a cutting tool that uses a diamond blade on a guided rail to cut through concrete walls. It runs on hydraulic power with low vibration and high precision. This article shares a real sale of a Hydraulic Wall Saw Machine to a contractor working in Saudi Arabia and the UAE. The customer needed to cut large openings in a thick concrete retaining wall for a new highway tunnel. This case shows how the right concrete wall cutting machine hydraulic helped finish the job in extreme heat and tight spaces.
Hydraulic Wall Saw Machine Key Parameters
The YG hydraulic wall saw machine comes in three models. The customer chose the YG-700TM for its water cooling and high oil flow. The table below shows the main specs from the factory documents.
| Model | YG-600TM | YG-700TM | YG-600RV |
| Maximum Power | 25 kW | 30 kW | 25 kW |
| Motor Cooling Method | Air cooling | Water cooling | Air cooling |
| Rated Voltage | 380V, 50Hz | 380V-420V, 50Hz-60Hz | 380V/400V, 3-phase, 50Hz |
| Pressure Stages | 3 | 3 | 3 |
| Max Operating Pressure | 200 bar / 20 MPa | 210 bar / 21 MPa | 200 bar / 20 MPa |
| Oil Flow Rate | 30-80 L/min | 40-100 L/min | 30-80 L/min |
| Dimension (mm) | 600×650×1050 | 500×520×1100 | 650×600×1000 |
| Weight | 220 kg | 140 kg | 210 kg |
The YG-700TM was chosen because it is lighter (140 kg) and has water cooling for hot weather. A forklift can move the power unit around the job site. A stacker can lift the rail and blade to higher cutting positions when working on tall walls.
Portable Hydraulic Wall Cutting Machine In Saudi & UAE
Saudi Arabia and the UAE have many large construction projects. The customer was a demolition contractor hired to prepare a tunnel entrance in a busy city area.
The project situation:
- The tunnel needed rectangular openings in a 600mm thick concrete retaining wall.
- The wall had high-density steel bars inside.
- The job site temperature often exceeded 45°C during summer.
- The contractor had to work near active traffic and public areas.
The customer’s real needs:
- A machine that could cut clean straight lines without shaking the wall.
- Low noise and dust to follow local safety rules (SASO and ESMA).
- Less labor needed because skilled workers are expensive in the Gulf region.
- The machine had to run reliably in extreme heat without overheating.
A Portable hydraulic wall cutting machine was the best solution because the job site had limited access for large equipment.
Why The Customer Chose Concrete Wall Cutting Machine Hydraulic？
The customer compared several cutting methods before choosing the YG-700TM hydraulic wall saw.
How he compared different options:
- Llooked at concrete wall cutting machine hydraulic models from three suppliers.
- Checked each machine’s max pressure, oil flow, and cooling system.
- Asked about heat resistance because the machine would run in 45°C+ weather.
- Read the manuals to see if one worker could set up and run the machine alone.
What made him choose the YG-700TM:
The water cooling method kept the motor running cool even at high temperatures
- The max operating pressure of 210 bar (21 MPa) gave strong cutting power.
- The oil flow rate of 40-100 L/min was higher than other models, meaning faster cutting.
- The machine weight of only 140 kg meant two workers could carry and mount it on the rail.
- The price was fair for the build quality and cutting speed.
- The supplier included a forklift and stacker in the same shipment for moving equipment.
The customer also checked that the Concrete Wall Saw for Sale came with English and Arabic manuals.
Concrete Wall Saw For Sale Benefits
The YG Concrete Wall Saw for Sale directly solved the customer’s main problems: not tiring workers and saving labor costs in a hot environment.
How the machine made work less tiring for workers:
- The fully hydraulic feed did all the pushing work; no heavy lifting or pulling needed.
- The remote control let the operator stand in a shaded area away from the cutting dust.
- The water cooling system kept the blade and wall surface from overheating.
- The machine ran smoothly without sudden jams, so workers did not get frustrated.
How the machine saved labor costs:
- One trained worker could set up the rail and run the whole cutting job.
- No need for a large crew to break up concrete with hammers.
- The clean cut edges did not need extra grinding or repair work.
- The machine ran for long hours without stopping, so the job finished faster.
Other benefits for the Saudi and UAE site:
Low vibration met SASO safety rules for demolition near traffic.
Wet cutting kept dust down, following local environmental rules.
The forklift moved the power unit and rail sections quickly, and the stacker stacked removed concrete blocks for disposal.
Delivery And Real Customer Feedback
The YG-700TM hydraulic wall saw machine was shipped by sea freight to Jeddah port in Saudi Arabia. All parts came in strong wooden crates with English and Arabic manuals and a video guide. The customer set up the machine on site in two hours.
Cutting was much faster than using a handheld saw or breaker.
The water cooling kept the machine running safely even at 48°C air temperature.
Only one worker was needed for the whole cutting job.
The forklift moved the power unit and rail between cutting positions with no delays.
The stacker helped stack cut concrete pieces in a safe pile for later truck loading.
The customer said the machine paid for itself in labor savings within one month.
The tunnel opening job finished four days ahead of schedule. The contractor avoided fines from dust and noise complaints.
Customer FAQs About Hydraulic Wall Saw Machine
Q1: How thick of a wall can this machine cut?
With a large blade, the YG-700TM can cut up to 700mm thick concrete in one pass.
Q2: Can the machine cut in very hot weather?
Yes. The water cooling model (YG-700TM) is made for high temperatures up to 50°C.
Q3: How many workers are needed to run the saw?
One trained worker can set up the rail and run the whole cutting job. A second worker can help move the 140kg power unit if needed.
Q4: Does the machine make a lot of dust?
No. The wet cutting method sprays water on the blade, so dust is very low. This follows local clean air rules.
Q5: Does YG provide training for the machine?
Yes. YG gives a full manual in English and Arabic, plus a video guide. Live video support is also available.
Why Buy A Hydraulic Wall Saw Machine From YG Company
YG Company makes reliable hydraulic wall saws for hot climates. The YG-700TM has a 30 kW water-cooled motor, 210 bar max pressure, 40-100 L/min oil flow, and weighs only 140 kg. YG ships fast to Saudi, UAE, and other Gulf countries with English and Arabic manuals. The machine saves labor, reduces dust, and cuts straight. The Saudi customer finished his tunnel project early and saved money. YG also supports forklift and stacker integration for a smooth workflow. Choose YG for easy, safe, and profitable wall cutting.