Dust control water fog cannon price matters for industrial buyers. This machine sprays fine mist to capture airborne dust. It saves water, improves safety, and meets environmental rules.
Below we break down key specs, working principle, cost factors, applications, and common fixes.
Dust Control Water Fog Cannon Main Parameters
All models run on 380V/50Hz, 3-phase electric. Horizontal rotation is 360°. Vertical angle is -10° to 55°. Cylinder material is Q235 carbon steel.
| YG-20 | 20m | 3kw | 1.5kw | 8 | None | 1000 L/h | 200kg |
| YG-30 | 30m | 3kw | 1.5kw | 10 | 460L | 1500 L/h | 250kg |
| YG-40 | 40m | 4kw | 2.5kw | 16 | 480L | 3000 L/h | 300kg |
| YG-60 | 60m | 11kw | 7.5kw | 22 | 800L | 7500 L/h | 350kg |
Key takeaway: longer spray distance requires larger fan and pump motors, which raises dust control water fog cannon price.
Water Fog Cannon Working Principle
- High-pressure pump pushes water to multiple nozzles.
- Water is atomized into 10–50 micron droplets.
- Powerful fan blows mist forward at high speed.
- Droplets collide with dust particles.
- Combined weight makes dust fall to ground.
No chemicals needed. Ordinary tap or recycled water works. Remote control keeps operator away from danger.
Why Fog Cannon Beats Traditional Sprinklers?
- Lower water use – 1000–7500 L/h vs sprinklers using 10,000+ L/h for same area.
- Higher capture rate – Fine mist catches particles as small as 10 microns.
- Mobility – Can be moved to dust hotspots.
- Less runoff – Mist evaporates, ground stays dry.
- Easy maintenance – Clean nozzles and check pump pressure.
What Factors Affect Dust Control Fog Cannon Price?
Six main factors determine final cost:
- Spray distance – Biggest factor. 20m units cost far less than 60m units.
- Motor power – Larger fan and pump motors cost more.
- Number of nozzles – 8 nozzles vs 22 nozzles adds cost.
- Water tank capacity – 460L, 480L or 800L tanks increase price.
- Material & coating – Q235 carbon steel is standard. Anti-corrosion or stainless steel costs extra.
- Automation features – Remote control, timer, explosion-proof design raise price.
Cheap machines with no spare parts lead to expensive downtime. Invest in reliable brands.
Fog Cannon Applications by Industry
Coal handling plants – Capture dust at transfer points and stockpiles.
Crusher plants – Place near crusher inlet to bind dust at source.
Mining (open-pit & underground) – Long-range models like YG-60 cover large pits.
Steel & cement factories – Control dust from raw material handling.
Ports & bulk terminals – Install on ship loaders.
Waste recycling yards – Suppress dust from shredders and sorting lines.
For construction site dust control fog cannon price, a mid-range model (YG-30 or YG-40) is usually enough. Construction sites need mobility and quick setup. A trailer-mounted version works best.
Fog Cannon Troubleshooting Guide
| No mist or weak spray | Empty tank or clogged filter | Refill tank, clean inlet filter |
| Uneven spray pattern | Blocked nozzles | Remove and soak nozzles, use soft brush |
| Fan runs, no water | Pump motor failed or pressure switch faulty | Check pump power connection; replace pump if needed |
| Cannon does not rotate | Steering motor or gearbox damaged | Check limit switches; reset control panel |
| Water leaking from pipes | Loose clamps or cracked pipe | Tighten clamps; replace damaged pipe |
Weekly maintenance tips:
- Clean all nozzles with compressed air.
- Inspect high-pressure hose for wear.
- Check pump oil level (if applicable).
These simple steps prevent most failures and extend machine life.
How to Choose the Right Fog Cannon?
- Measure your area – 30m radius → YG-30. 60m radius → YG-60.
- Check water supply – YG-60 needs 7500 L/h. Ensure enough flow or a recycling system.
- Confirm power source – Standard models use 380V/50Hz three-phase. Use transformer if only single-phase available.
- Decide on mobility – Fixed models are cheaper. Trailer-mounted or skid-mounted cost more but offer flexibility.
Why Buy Dust Control Water Fog Cannon from YG Machinery?
YG Machinery is a professional manufacturer of industrial dust control equipment. Our products include:
- Fog cannons (YG-20, YG-30, YG-40, YG-60, and custom 120m models)
- Trailer-mounted fog cannon
- Portable dust suppressor
- Industrial dust extractor
- High-pressure misting system
- Rebar straightening machine
- Bar cutting machine
- Rebar coil straightening line
Every machine is tested before shipping. We provide spare parts and technical support via WhatsApp/WeChat/Phone: +86 13837115193.
Request a dust control water fog cannon price quote today. Tell us your required spray distance and site conditions. We will recommend the best model and send you a detailed offer.