In August 2026, Norwegian industrial contractor Nordfjord Industrial Maintenance AS ordered 20 Sandblasting Machine units from YG Machinery. Based on Norway’s west coast, Nordfjord handles surface preparation work for industrial facilities. Its projects include steel platforms, support frames, equipment housings, plates, and welded components.
Norway’s coastal climate creates regular cleaning and preparation work. Rain, moisture, and salty air gradually affect exposed metal. For upcoming projects, Nordfjord needed a practical method for removing rust and old coatings before repainting.
Before this purchase, workers relied on hand tools for smaller areas. Larger sections required more manual preparation. Nordfjord therefore looked for industrial sandblasting equipment that could cover wider steel surfaces.
Sandblasting Machine Technical Parameters
| Item | 800mm |
| Diameter | 800mm |
| Height | 1900mm |
| Volume | 0.6m³ |
| Working Pressure | 0.5-0.8Mpa |
| Working Efficiency | 10-12m²/h |
| Air Consumption | 4-6m³/min |
Industrial Sandblasting Machine for Steel Preparation
Nordfjord uses the industrial sandblasting machine for steel sections that require more extensive preparation than hand tools provide. Typical work includes rust removal, old coating removal, and surface cleaning before repainting.
The equipment will handle applications such as:
- Outdoor steel platforms
- Structural support frames
- Steel plates and panels
- Welded sections
- Metal equipment housings
Workers inspect each section before blasting. Loose material receives preliminary treatment, while sound areas move directly into the blasting process.
Project manager Lars Johansen explained:
“We needed blasting equipment for regular work. We wanted a practical solution for larger steel sections.”
The purchase therefore focused on recurring industrial surface preparation rather than a single repair job.
Pressure Sandblasting Machine for Rust Removal
Rust removal forms a regular part of Nordfjord’s maintenance work. Operators use a pressure sandblasting machine to clean corrosion and remaining coatings from metal surfaces before repainting.
Working methods vary according to the shape and condition of each component. Welded joints and corners require controlled movement, while large flat sections allow a more consistent blasting path.
Workers also test a small area before treating a larger section. This check lets them assess the surface condition and adjust the working method before continuing.
For heavier corrosion, operators give attention to complete coverage. Lighter contamination does not require unnecessary repeat treatment.
Abrasive Blasting Equipment for Industrial Work
The abrasive blasting equipment will serve industrial locations with different surface treatment requirements. Common applications include:
- Removing surface rust
- Cleaning old coatings
- Preparing metal before repainting
- Treating welded areas
- Cleaning exposed outdoor components
For sandblasting machine for rust removal applications, workers check the material and coating condition before starting. They then select an appropriate blasting method for the surface.
After the initial project, Lars Johansen commented:
“The machine fits our work well. We tested it on several steel sections before starting the larger areas.”
This initial test gave the site team a practical reference for subsequent blasting work.
Coastal Surface Treatment in Norway
Many Nordfjord projects take place near the Norwegian coast. Weather conditions therefore affect outdoor preparation schedules, particularly when work involves exposed steel structures.
Crews divide large jobs into manageable sections. After completing each area, workers inspect the surface before the coating stage begins.
This workflow also allows preparation crews and painters to coordinate their work. Once one section meets the required preparation condition, the next trade can begin its assigned task.
Equipment availability gives Nordfjord greater flexibility when projects overlap. Crews can organise preparation work around individual site schedules without relying entirely on hand tools.
Sandblasting Equipment Delivery to Norway
Before production, Nordfjord provided information about its compressed-air systems and planned applications. YG Machinery’s engineering team reviewed these requirements and confirmed the selected specifications.
As a sandblasting machine manufacturer, YG Machinery completed factory production and pre-shipment inspection according to the confirmed order.
Quality checks covered the tank structure, connection parts, valves, pipelines, equipment condition, and technical documents. The factory then prepared the shipment for international transport.
After arrival in Norway, operators connected the equipment to the available air systems and began site testing. The engineering team provided guidance on setup and routine inspection during the initial operating stage.
Steel Surface Preparation Equipment for Industrial Projects
Nordfjord purchased the equipment for continuing industrial work across several Norwegian locations. Crews will use the steel surface preparation equipment for rust removal, coating preparation, and related metal treatment.
Factory production and inspection provide a direct connection between manufacturing and technical support. For overseas buyers comparing a sandblasting equipment supplier, this process also gives them a clear point of contact during production and initial operation.
When your project involves steel structures, rust removal, or coating preparation, don’t hesitate to contact YG Machinery with your required working area and surface conditions. The engineering team always provide suitable model information and a quotation based on the application.
