A rebar bending machine is a tool that bends steel bars into specific shapes like hoops, angles, or U shapes. It helps workers create bent rebars for concrete columns, beams, and foundations. This machine works fast and gives consistent results. Many construction teams use it to prepare steel frames for buildings and bridges.
Rebar Bending Machine Parameters
Below are real specifications for four YG models. All data comes from product documents.
| Single Wire Round Steel (mm) | 4-10 | 4-12 | 5-14 | 4-12 |
| Single Wire Deformed Bar (mm) | 4-8 | 4-10 | 5-12 | 4-10 |
| Double Wire Round Steel (mm) | 4-6 | 4-8 | 5-10 | 4-8 |
| Double Wire Deformed Bar (mm) | 4-6 | 4-8 | 5-10 | 4-8 |
| Max Bending Angle | ±180° | ±180° | ±180° | ±180° |
| Center Pin Diameter (mm) | 16,18,20 | 16,18,20 | / | 16,18,20 |
| Maximum Towing Speed (m/min) | 60 | 60 | 110 | 110 |
| Maximum Bending Speed (per sec) | 800 | 800 | 1000 | 800 |
Steel Hoop Bending Machine Advantages
- Strong bending ability: It can bend round steel up to 14mm (YG-3 model) and deformed bars up to 12mm.
- High speed: Maximum bending speed reaches 1000 shapes per second on YG-3. Towing speed goes up to 110 m/min.
- Wide angle range: You can bend bars from 0 to ±180 degrees. This covers almost all construction needs.
- Double wire bending: Models YG-1, YG-2, YG-3, and YG-4 can bend two wires at the same time. This doubles your output.
- Adjustable center pins: Most models come with 16mm, 18mm, and 20mm pins for different bar sizes.
Many contractors look for a steel hoop bending machine because it makes consistent hoops for concrete columns.
Steel Rebar Bender Machine Applications
- Building construction: Bend rebars for floor slabs, beams, and staircase landings.
- Bridge projects: Create curved rebars for arch bridges and pile caps.
- Precast concrete plants: Make bent steel frames for wall panels and pipes.
- Steel bar workshops: Process large volumes of bent rebars daily.
A steel rebar bender machine can also handle both round and deformed steel bars. For cutting before bending, you can use a Rebar Cutting Machine to prepare precise lengths.
Main Functions Of Bar Bending Machine Manufacturer Design
- Automatic bending: You set the angle, and the machine bends each bar to that degree.
- High frequency bending: Up to 1000 bends per second on YG-3, so you finish jobs quickly.
- Dual wire processing: Bend two steel bars at once to save time.
- Adjustable pins: Change center pins to match different bar diameters.
As a bar bending machine manufacturer, YG designs these machines for easy operation. The control panel is simple. Workers learn it fast.
FAQs About Rebar Bending Machine
Q1: What is the thickest bar I can bend?
A: For single round steel, YG-3 bends up to 14mm. For deformed bars, YG-3 bends up to 12mm.
Q2: Can I bend two bars at the same time?
A: Yes. All four models support double wire bending. For example, YG-2 can bend two 8mm round steel bars together.
Q3: What bending angle can I get?
A: Maximum angle is ±180 degrees. You can set any angle between 0 and 180.
Q4: Does the machine need special maintenance?
A: Keep the moving parts lubricated. Check the pins for wear. Replace them if loose.
Q5: Which model is fastest?
A: YG-3 has the highest bending speed at 1000 per second and towing speed at 110 m/min.
We also sell Replacement Center Pins for all models. Keep extra pins ready for different bar sizes.
Steel Hoop Bending Machine In Thailand And Philippines
A precast concrete company in Bangkok bought the YG-3 steel hoop bending machine. They needed to bend 10mm deformed bars into hoops for 2000 concrete piles. The machine ran 8 hours daily without problems.
Customer feedback: “This machine bends hoops perfectly every time. We reduced scrap by half.”
Another buyer in Manila used the YG-2 for bending stirrups. They also added a Rebar Straightening Machine to prepare coiled wire before bending. The customer said, “Fast and accurate. Our workers love it.”
Bar Bending Machine Manufacturer-YG Manufacturer
YG company has produced rebar processing machines for many years. We focus on real specifications, strong build quality, and easy operation. Our machines are tested before delivery. We offer spare parts and online support worldwide. YG stands out because we provide clear data without fake claims. Our bending speeds of up to 1000 per second are honest and tested. We also have fast shipping and competitive factory prices. Whether you need a small YG-1 for light work or a fast YG-3 for high volume, we have the right rebar bending machine for you. Contact us today to get a quote and free advice on your bending needs.