A Diamond Wire Saw Machine is a cutting tool used to cut thick concrete, reinforced concrete beams, columns, bridges, and floors. It can also cut stone like marble and granite. This machine works with a wire rope that has diamond beads. It cuts without strong vibration or loud noise. You can use it for demolition projects or mining work. Many people call it a concrete wire saw or a diamond wire saw for concrete.
Parameters Of Hydraulic Wire Saw
Below is a table showing key parameters of the hydraulic wire saw from YG Machinery. These numbers help you understand its power and size.
| Wire Drive Mode | Hydraulic | Motor Power | 22/25 kw |
| Motor Type | HM-80, 2 cylinders | Voltage | 220V/380V, 50Hz |
| Minimum Input Power | 25HP/33HP | Hydraulic Pump Type | Gear Pump |
| Output Shaft Speed | 350/940/1300 r/min | Main Drive Motor Flow | 40-100 L/min |
| Maximum Wire Length | 20 m | Working Pressure | 15-20 Mpa |
| Feeding Method | Fully hydraulic | Oil Tank Capacity | 17 L |
| Wire Saw Wheel Weight | 64 kg | Pump Station Weight | 160 kg |
| Size (Wheel) | 1700*700*800 mm | Size (Pump) | 700*700*1200 mm |
Advantages Of Hydraulic Wire Saw
- Strong power: The hydraulic wire saw makes cuts that are straight and neat, no need to trim the cut surface.
- Low noise and vibration: The machine works with low noise and almost no vibration, safe and easy to operate.
- Less worker fatigue: Workers feel less tired because the machine does the heavy work.
- High cutting speed: The cutting speed is high, which shortens the project time, saves labor costs, and helps you take more jobs.
Applications Of Electric Wire Saw For Sale
- Good for smaller jobs: An electric wire saw for sale runs on normal household electricity (380V), no hydraulic pump station needed.
- Lower cost: This makes it cheaper to buy and use than a hydraulic type.
- Indoor and tight spaces: You can cut concrete indoors or in places with little space.
- Best for thin concrete: It works well for cutting thin concrete walls or floors, and light demolition work.
- Also cuts small beams: You can use it to cut reinforced concrete beams in small buildings.
- Choose based on thickness: If you need to cut very thick concrete, the hydraulic type is better. For tight budgets or small projects, the electric type is a smart choice.
How Does Wire Saw Cut Concrete Process?
- Drill two small holes: First, drill two small holes through the whole concrete piece.
- Insert the diamond wire: Next, put the diamond wire rope through the holes and connect the ends to make a loop.
- Place the wire around wheels: Then, place the wire around the drive wheel and guide wheels. The machine will pull the wire.
- Start the machine: Start the machine. The wire moves fast and rubs against the concrete. The diamond beads grind the concrete away.
- Automatic feeding: The machine feeds the wire slowly. The cut goes deeper until the piece falls off.
- Add cooling water: Add water to cool the wire and reduce dust. Water also helps the wire last longer.
The whole process is safe and quiet. One person can control the machine from a distance. For cutting large concrete walls, you can also use a concrete wall saw from YG Machinery as a complementary tool.
Maintenance Tips For Wire Saw Cut Concrete
- Clean after each use: Remove concrete dust and dirt from the wheels and motor.
- Check the diamond wire rope: If the beads are worn flat, replace the rope. A good rope cuts faster.
- Inspect the hydraulic oil: Change the oil every few months. Keep the oil tank clean.
- Check the cooling water system: Make sure water flows freely. Without water, the wire gets too hot.
- Tighten all bolts and screws: Vibration can loosen them. A loose part is dangerous.
- Store in a dry place: Rain and humidity can rust the metal parts.
After cutting, you may need to break the fallen concrete into smaller pieces. A hydraulic breaker from YG Machinery can do this job quickly and easily.
FAQs About Diamond Wire Saw Machine
Q1: Can this machine cut steel bars inside concrete?
Yes. The diamond wire easily cuts through steel bars. You do not need to remove the steel first.
Q2: How long does the diamond wire rope last?
It depends on the concrete thickness and steel amount. One rope can cut many square meters. We recommend buying spare ropes.
Q3: Is the hydraulic type better than the electric type?
For big jobs, yes. Hydraulic is more powerful. For small jobs, electric is cheaper and fine.
Q4: Do I need special training to use this machine?
Basic training is helpful. The machine is easy to learn. We provide a manual and video guides.
Q5: Can I cut curves or complex shapes?
Yes. The wire is flexible. You can cut circles, arches, or any shape by changing the guide wheels.
Diamond Wire Saw Machine In Australia
In Sydney, Australia, a construction company needed to remove a thick concrete bridge beam. The beam was 1.5 meters thick with many steel bars. They used a Diamond Wire Saw Machine from YG Machinery. The cut was finished in one day. The beam fell safely without cracks.
The project manager said: “This wire saw saved us time and money. The cut was perfect.”
The company also bought an excavator drum cutter from YG Machinery to handle the remaining concrete sections.For foundation demolition, a pile breaker from YG Machinery can work side by side with the wire saw to speed up the whole project.
Why Choose YG Machinery For Your Diamond Wire Saw Machine?
YG Machinery is a real factory with strong experience in making demolition equipment. Our Diamond Wire Saw Machine uses Australian motors and Italian hydraulic parts. The weight is light for the same power size. We offer both hydraulic and electric types. All products have good quality and competitive prices. We ship worldwide. Our customer service answers your questions quickly. You can contact us by WhatsApp, WeChat, phone, or Skype at +86 13937183172. Get a free quote now. Let us help you finish your cutting jobs faster and safer.